| No. | Brand | d | t | R | m | r | M | W | e |
| NU3896-M1 | FAG | - | - | - | - | - | - | - | - |
| Z-527250.ZL | FAG | - | - | - | - | - | - | - | - |
| NU10/560-M1A | FAG | - | - | - | - | - | - | - | - |
| NU10/500-M1 | FAG | 300 mm | - | - | - | - | - | - | - |
| NU28/500-M1A | FAG | 11,112 mm | - | - | - | - | - | - | - |
| NU22/500-E-M1 | FAG | 70 mm | - | - | - | - | - | - | - |
| NU29/600-E-M1 | FAG | - | - | - | - | - | - | - | - |
| N10/600-M1B | FAG | 60 mm | - | - | - | - | - | - | - |
| NU28/600-M1 | FAG | - | - | - | - | - | - | - | - |
| Z-527463.ZL | FAG | 260 mm | - | - | - | - | - | - | - |
| NU20/530-E-M1 | FAG | - | - | - | - | - | - | - | - |
| N28/670-M1 | FAG | - | - | - | - | - | - | - | - |
| NU1896-M1 | FAG | 27,99 mm | - | - | - | - | - | - | - |
| NU38/630-M1 | FAG | - | - | - | - | - | - | - | - |
| NU30/630-M1 | FAG | - | - | - | - | - | - | - | - |
| NU29/750-M1 | FAG | - | - | - | - | - | - | - | - |
| NU30/670-M1 | FAG | - | - | - | - | - | - | - | - |
| NU28/670-M1 | FAG | - | - | - | - | - | - | - | - |
| Z-527272.ZL | FAG | - | - | - | - | - | - | - | - |
| NU1096-M1 | FAG | 60 mm | - | - | - | - | - | - | - |
| NU3992-E-M1 | FAG | 280 mm | - | - | - | - | - | - | - |
| NU18/530-M1 | FAG | 66,675 mm | - | - | - | - | - | - | - |
| FAG Z-527250.ZL Cylindrical roller bearings with cage | cage material:Graphite; overall width:23 mm; outer ring width:23 mm; Limiting temperature T max.:350 °C; Noun:Bearing; Weight / LBS:2.265; Weight / Kilogram:1.027; Enclosure:2 Metal Shields; fillet radius:1.5 mm; Outside Diameter:4.724 Inch | 120 Mil; |
| FAG NU12/500-M1A Cylindrical roller bearings with cage | Size (mm):48x62x40; Outer Diameter (mm):62; Width (mm):40; Bearing number:RNA 6908; r min.:0,6 mm; C:40 mm; Brand:IKO; Basic dynamic load rating (C):71,3 kN; Bore Diameter (mm):48; D:62 mm; |
| FAG NU10/710-M1A Cylindrical roller bearings with cage | Dimension RV:0.05 in; Dimension G:2.630 in; Dimension H:1.25 in; Dimension J (Bolt Size):0.625 in; Y1 - Geometry Factor:2.84; Dimension D Max:7.88 in; e - Geometry Factor:0.24; Pre Install Clearance Min:0.0030 in; Oil Lubrication - T Seal:3500 rpm; Dimension L:3.33 in; |
| FAG N10/600-M1 Cylindrical roller bearings with cage | Designation SKF:VKBA 3341; Compatibility:TOYOTA / Celica 4WD; Brand:Ruville; Designation SX:CX494; Designation SNR:R169.28; Designation FAG:713618320; Bearing number:6928; |
| FAG NU2288-E-M1 Cylindrical roller bearings with cage | C - Cup Width:0.9375 in; Cup Part Number:HM911210; D:5.1250 in; Cg - Geometry Factor:0.0842; r - Cup Backface To Clear Radius1:0.130 in; e - ISO Factor2:0.82; Series:HM911200; Design Units:Imperial; Y - ISO Factor3:0.73; Db - Cup Backface Backing Diameter:4.29 in; |
| FAG NU3192-M1A Cylindrical roller bearings with cage | Bore Diameter (mm):100; Size (mm):100x125x13; d:100 mm; Weight:0,31 Kg; Brand:FBJ; Width (mm):13; (Grease) Lubrication Speed:4600 r/min; Basic dynamic load rating (C):19,9 kN; C:13 mm; Basic static load rating (C0):18,3 kN; |
| FAG NU29/560-M1 Cylindrical roller bearings with cage | Weight / Kilogram:0; maximum rpm (grease):16000 rpm; EAN:4547359614060; Bore Diameter (mm):12,000; Cage Material:Steel; Outer Diameter (mm):32,000; Category:Single Row Ball Bear; Internal Special Features:Wide Inner Ring; Enclosure:1 Seal-1 Metal Shiel; internal clearance:CN; |
| 560 mm x 750 mm x 85 mm FAG NU19/560-M1 Cylindrical roller bearings with cage | d:8 mm; D1:18 mm; Da max.:14,4 mm; Basic static load rating (C0):0,715 kN; D:16 mm; Basic dynamic load rating (C):1,61 kN; da min.:9,6 mm; C:5 mm; B:5 mm; C1:1,1 mm; Size (mm):560 mm x 750 mm x 85 mm ; |
| 460 mm x 680 mm x 100 mm FAG NU1092-M1 Cylindrical roller bearings with cage | Size (mm):460 mm x 680 mm x 100 mm ; SRIN:0; D:240 mm; ra:1.5; KBRG:5111; SRIX:0.1; LangID:1; SREX:0.1; d:170 mm; C:280; |
| FAG Z-537025.ZL Cylindrical roller bearings with cage | Brand:NTN; Width (mm):107,95; Outer Diameter (mm):206,375; d:120,65 mm; D:206,375 mm; Bearing number:4T-795/792D; Size (mm):120.65x206.375x107.9; T:107,95 mm; Bore Diameter (mm):120,65; |
| FAG NU2292-E-MPA Cylindrical roller bearings with cage | Brand:SKF; D2 ≈:4.2 mm; da max.:2.9 mm; da min.:2.9 mm; Basic static load rating (C0):0,025 kN; ra max.:0.1 mm; Weight:0,0002 Kg; B:5,944 mm; Width (mm):5,944; Outer Diameter (mm):4,762; |
| FAG NU18/560-M1 Cylindrical roller bearings with cage | nG Fett:2600 1/min / Limitin; s:3,4 mm / Axial displ; Bearing number:NNU4940-S-K-M-SP; Da max:270 mm; d:200 mm; da min:210 mm; Brand:FAG; D1:252,2 mm; ra max:2 mm; Bore Diameter (mm):200; |
| FAG Z-527249.ZL Cylindrical roller bearings with cage | Weight:19,5 Kg; Basic static load rating (C0):560 kN; Brand:ISB; Width (mm):56; C:56 mm; Outer Diameter (mm):340; a:196 mm; Bearing number:QJ 1044; D:340 mm; B:56 mm; |
| FAG NU18/530-M1 Cylindrical roller bearings with cage | d:66,675 mm; ra1 max.:3,3 mm; Category:Bearings; Minimum Buy Quantity:N/A; Nlim (grease):2,800 rpm; Characteristic cage frequency, FTF:0.43 Hz; C:31,75 mm; Weight:2,74 Kg; db:77 mm; Characteristic rolling element frequency, BSF:6.57 Hz; |
NU12/530-M1 FAG轴承圆柱滚子轴承【内径530外径980厚度
Sep 15, 2011 - NU12/530-M1 FAG轴承圆柱滚子轴承【内径530外径980厚度200】_zjdt1234_新浪博客,zjdt1234,
50 - Tengen Bearing
Principal Dimensions, Designation. d, D, B, Local, SKF, FAG, NSK. mm ... 500, 920, 185, NU 12/500 M, NU 12/500 MA, NU 12/500 E.M1, NU 12/500 M. 530, 650, 72, NJ 28/530 M, NJ 28/530 ECMA, NJ 28/530 E.M1, NJ 28/530 M
NTN NJ28/530 Bearing | NJ28/530 bearing; FAG NU19/600
NJ28/530 Bearing product introduction NJ28/530 NTN Shipping process NTN NJ28/530 ... FAG NU19/600-M1 bearing; SKF PCM252830E bearing; FAG 23068-K-MB H3068-HG ... SKF NU12/500MA bearing for industrial machinery in
FAG NU218E-M1-C3 Cylindrical Roller Bearing, Single Row
FAG NU218E-M1-C3 Cylindrical Roller Bearing, Single Row, Straight Bore, Removable Inner Ring, High Capacity, Brass Cage, C3 Clearance, 90mm ID,
FAG Rolling Bearing Cages: Designation, Design, Material
bearing cages that can be produced by FAG (several ... FAG | 4. 1) In the order designation the cage suffix is M1. 2) In the order designation the ... NU1292 - NU12/500 ... NJ22/530. M. NJ22/560 - NJ22/630. M1. NU2203E - NU2226E. TVP2
FAG 【 NU19/670-TB-M1 】 Brasov
NU 12/500,NU 29/530,NU 19/560,NU 29/560 SKF FAG NSK Cylindrical roller bearings NU19, non-locating bearing, with cage NU19/560-M1, 560, 750,
Large Size Bearings - the Schaeffler Group
Schaeffler Technologies with its brands INA and FAG is a leading worldwide ... K-M1-SP. Super precision cylindrical roller bearings, non-locating .......... 284. N18 ... NU12. Cylindrical roller bearings with cage, non-locating ................... 284 ... 97. 290. +195. 0. 0. 118. 355. +230. 0. 0. 143. 430. +280. 0. 0. 177. 530. +330. 0. 0
Single Row NU12/560E.M1A Roller Cylindrical Ball Bearing
Vertical mill required on each roller bearing, Such as, 1, tapered roller bearing FAG 531818 c (560 x 1080 x 530 mm) 1, cylindrical roller bearing FAG NU12/560
FAG Rolling Bearing Cages - Yumpu
NU1292 - NU12/500 M1. NUP1244 ... NU22/530. M. NU22/560 - NU22/630 M1. NUP2203E - NUP2226E TVP2 ... M1. FAG Cylindrical roller bearings, single
FAG NU12/530-M1 Cylindrical roller bearings with cage Video